quality Prefab Steel House & Modular House factory

Detailed process of prefabricated house installation   1. The center line specification of each wall foundation is first measured according to the requirements of the engineering drawings and the center line specification error is plus or minus 25mm, and the length-width ratio error of the wall foundation is measured.   2. The raw materials of the house should be loaded and unloaded on-site first, and the raw materials should be effectively transported to each construction site. They should be handled with care during transportation to prevent damage to the raw materials. The size of the steel frame structure and the welding quality should be checked before construction.   3. According to the size of the drawing, bury the chassis iron first, and fix it with expansion bolts and basic fixings.   4. The steel frame structure is assembled, and the rectangular columns and steel beams are assembled with screws. During assembly, the screws must be tightened, and the steel beams are vertical, coplanar, and the assembly parts meet all requirements.   5. For the assembled steel frame structure, first lift a steel beam, and the steel beam holds a square pipe column. It should be supported and reinforced with steel beams. It should be vertical to the road surface. Use a steel tape measure to measure the specifications, and then lift the second beam, install the sheet beam, and fix it with screws. Other load-bearing beams and sheet beams can be installed in time according to the above process, and the steel beam position again for errors and adjustments.   6. After confirming that everything is correct, use angle steel to weld the horizontal support and the through-frame in the steel beam, and then weld the square tube column and chassis iron.   7. After the columns and beams are installed, install the floor. The floor should be dense between the floor.   8. After the floor is laid, start installing the board wall. When installing the board wall, pre-embed the position of the windows and doors. After all the walls are installed, start installing the cast-in-place board, eaves board, moisture-proof treatment, roof cover, etc.   9. After the overall installation of the house is completed, install the windows and doors. Pay attention to the density of the window installation, and there should be no gap with the board wall. After the window is installed, a moisture-proof treatment should be carried out. The door should be installed flat and straight, and the environment should look clean.   10. When installing the guardrail on the house floor, it is required that the guardrail is vertical and firmly connected with the guardrail column. The steps are made of patterned steel plates or angle steels. The floor should not shake. The indoor stairs are fixed to the umbrella wall. The guardrail plate is fixed to the indoor stairs with 75MM self-drilling self-tapping screws.   11. Spice the PVC ceiling gussets After pouring the top epoxy floor and installing the cables.

Prefabricated modular houses have the following characteristics: 1. Relocation: It can be relocated as a whole or disassembled and then assembled, and has strong relocation capabilities. This means that it can be moved to different locations when needed to adapt to different environments and uses. 2. Modular design: Modular design is usually adopted, that is, the house is divided into multiple independent modules, each with its own function and structure. Such a design allows mobile houses to be flexibly combined and adjusted as needed to adapt to different space requirements. 3. Quick construction: The use of factory prefabrication and on-site assembly can greatly shorten the construction time. The prefabricated modules are manufactured in the factory and then transported to the site for assembly, so as to achieve rapid construction and use. 4. Environmental protection and energy saving: Environmentally friendly materials and energy-saving equipment are used, such as renewable materials, energy-saving lamps, solar panels, etc. These designs can reduce energy consumption and environmental pollution, and are in line with the concept of sustainable development. 5. Versatility: The design can be flexibly adjusted according to needs, and can be used for multiple purposes such as residences, offices, shops, exhibition halls, etc. It can meet the needs of different scenarios and provide a variety of functional spaces. In general, prefabricated houses have the characteristics of relocation, modular design, rapid construction, environmental protection, energy saving and versatility. These characteristics make prefabricated houses an ideal choice for emergency housing, temporary office space, tourist facilities and other fields.

How durable and structurally stable are light steel structure houses? Light steel villas are buildings with light steel structures as the main body, which have high durability and structural stability. The following is a detailed description of the material characteristics, structural design and practical application of light steel villas. First of all, the main material used in light steel villas is light steel structure. Light steel structure has the advantages of high strength, light weight, corrosion resistance and good seismic performance. It has been carefully calculated and strictly controlled to meet the structural requirements of the building. The light steel structure uses special processes such as corrosion resistance, mildew resistance and fire resistance to ensure the long service life of the building. Secondly, the load distribution and seismic requirements are taken into account in the structural design of light steel villas. Light steel villas generally adopt an integral frame structure, which consists of beams, vertical columns and foundations. The beams and vertical columns are connected by bolts to form a stable structural system. At the same time, light steel villas are assembled with light materials, which can flexibly adjust the space layout to meet personalized needs. In addition, seismic performance is also considered in the design of light steel villas. Light steel structure can improve the seismic performance of the house by increasing the lateral resistance system, ensuring the structural stability and safety of the house when natural disasters such as earthquakes occur. In practical applications, light steel villas have been widely used and have achieved good results. On the one hand, light steel villas have good insulation and heat preservation properties, which can keep the indoor warmth in cold areas; on the other hand, light steel villas can be modularly produced and quickly assembled, which greatly shortens the construction period and reduces resource waste. At the same time, the structural stability of light steel villas has also withstood the test of practical applications and can maintain structural stability under various environmental conditions. In general, light steel villas have high durability and structural stability. It not only has reliable material quality and reasonable structural design, but also has many advantages in practical applications. In the future, with the continuous development and improvement of light steel villa technology, it is believed that the durability and structural stability of light steel villas will be further improved.